Client login here.

Contact

Find where our offices
are located, and all the information of how to
reach us.

Site Map

CPC Pump

Patterson Fire Pump

Labour Taber Pump

Kerr Pump

Weatherford Pump

Garbarino Pump

Ensival Moret Pump

Arrow Engine

UPCO, Inc

Skinner

Precision Downhole Pump


+Company Profile PGP+Download Garbarino G-GH

CPC PUMPS

 

HR/HOR (OH2)

 

Typical Application:
Single suction, centre-line mounted process pump for refinery service.
An adaptation of the HR applications requiring an open, non-clog impeller design, such as slurry coke crusher services


Fully compliant with API 610 requirements
Operating Parameters:

  • Flow rate in excess of 15,000 USGPM (3,400 m3/h).
  • Differential heads up to 1,200 FT (365 m).
  • Temperatures up to 800 Deg. F (425 Deg. C)
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available, in excess of 1,450 PSIG (10,000 kpag).

 

Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings, with end suction or top suction design casings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers, for expanded hydraulic coverage.
  • Close clearance metalized carbon throat bushing for optimal control of stuffing box environment.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Cylindrical roller radial bearings for ample load carrying capability.
  • Duplex angular contact 7300 series thrust bearings.
  • Inpro/Seal bearing housing isolators.
  • Heavy Duty baseplate, drip rim or drip pan designs.

 

Optional Features:

  • Semi-open Coke Crusher design, with wear plate.
  • High pressure special casing design.
  • Oil Flinger/Oil Ring/Purge Mist/Pure Oil lubrication of bearings.
  • Oversized shafts and bearing housing arrangements.
  • Fan/Heat-sink bearing housing cooling arrangement for operation at elevated temperatures, to eliminate the need for cooling water.
  • Magnetic bearing housing isolators.
  • Pre-grouted baseplates or non-grouted baseplates.
  • Non-standard API 610 material available.

 

MODEL VP Series

VP-B (OH3)

Typical Application:
Single suction, in-line mounted process pumps
for refinery services where a separate pump
bearing house is required.

Fully compliant to API 610 requirements


Operating Parameters:

  • Flow rate in excess of 8,000 USGPM (1,800 m3/h).
  • Differential heads up to 1,200 FT (365 m).
  • Temperatures up to 800 Deg. F (425 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available, in excess of 1,450 PSIG (10,000 kpag).

 

Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers, for expanded hydraulic coverage.
  • Close clearance metalized carbon throat bushing, for optimal control of stuffing box environment.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Cylindrical roller radial bearings for ample load carrying capability.
  • Duplex angular contact 7300 series thrust bearings.
  • Grease or pure mist lubrication.
  • Inpro/Seal bearing housing closures.

 

Optional Features:

  • Semi-open Coke Crusher design, with wear plate.
  • High pressure special casing design.
  • Oversized shafts and bearing housing arrangements.
  • Magnetic bearing housing isolators.
  • Mounting plate.
  • Soleplate.
  • Thrust Pod (TP) design, for extra heavy thrust loads, with oil bath lubrication.
  • Non-standard API 610 material available.

VP-BOC (OH3)

Typical Application:
Single suction, in-line mounted process pumps
for refinery services where a separate pump
bearing house is required.

 

Fully compliant to API 610 requirements

Operating Parameters:

  • Flow rate in excess of 8,000 USGPM (1,800 m3/h).
  • Differential heads up to 1,200 FT (365 m).
  • Temperatures up to 800 Deg. F (425 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available, in excess of 1,450 PSIG (10,000 kpag).

 

Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers, for expanded hydraulic coverage.
  • Close clearance metalized carbon throat bushing, for optimal control of stuffing box environment.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Cylindrical roller radial bearings for ample load carrying capability.
  • Duplex angular contact 7300 series thrust bearings.
  • Oil circulation lubrication.
  • Inpro/Seal bearing housing closures.

 

Optional Features:

  • Semi-open Coke Crusher design, with wear plate.
  • High pressure special casing design.
  • Oversized shafts and bearing housing arrangements.
  • Magnetic bearing housing isolators.
  • Mounting plate.
  • Soleplate.
  • Thrust Pod (TP) design, for extra heavy thrust loads, with oil bath lubrication.
  • Non-standard API 610 material available.

VP-C-OH4

 

Typical Application:
“The” in-line pump for all service where space is
limited and piping configuration and accessibility
for maintenance are important.

 

Fully compliant to API 610 requirements

Operating Parameters:

  • Flow rate in excess of 8,000 USGPM (1,800 m3/h).
  • Differential heads up to 1,200 FT (365 m).
  • Temperatures up to 800 Deg. F (425 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available, in excess of 3,750 PSIG (26,000 kpag).

                 
Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers.
  • Close clearance metalized carbon radial bearing/throat bushing.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Product lubricated impeller bearing.
  • Tri-Link patented rigid spacer coupling, allowing removal of seal cartridge without disturbing driver.

                 
Optional Features:

  • High pressure special casing design.
  • Oversized shafts.
  • Cartridge design Impeller bearing, for ease of maintenance.
  • Air-Ex Stuffing Box spacer, for high temperature or Cryogenic applications.
  • Mounting plate.
  • Soleplate.

VP-M-OH5

 

Typical Application:
"The" in-line pump for applications where space limitations, piping configuration and maintenance considerations are the primary factors. The VP-M eliminates the need for the rigid coupling used for the traditional in-line pump design.

 

Fully compliant to API 610 requirements

Operating Parameters:

  • Flow rate in excess of 8,000 USGPM (1,800 m3/h).
  • Differential heads up to 1,200 FT (365 m).
  • Temperatures up to 300 Deg. F (150 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).

               
Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers.
  • Close clearance metalized carbon impeller bearing, a combination radial bearing/throat bushing.

               
Optional Features:

  • Mounting plate.
  • Soleplate.

HDR-BB2

 

Typical Application:
Double suction, centre-line mounted pumps designed for high temperatures and pressures withtop/top nozzles.

 

Single Stage Double Suction Pumps
Fully compliant with API 610 requirements

Operating Parameters:

  • Flow rate in excess of 25,000 USGPM (5,700 m3/h).
  • Differential heads up to 1,400 FT (425 m).
  • Temperatures up to 800 Deg. F (425 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available.

               
Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 300# flange ratings, with side suction or top suction design casings.
  • Available in all API 610 Table H-1 materials.
  • Cast or fabricated impellers, for expanded hydraulic coverage.
  • Close clearance metalized carbon throat bushing for optimal control of stuffing box environment.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Cylindrical roller radial bearings for ample load carrying capability.
  • Duplex angular contact 7300 series thrust bearings.
  • Inpro/Seal bearing housing isolators.
  • Heavy Duty baseplate, drip rim or drip pan designs.

               
Optional Features:

  • High pressure special casing design.
  • Oversized shafts and bearing housing arrangements.
  • Fan/Heat-sink bearing housing cooling arrangement for operation at elevated temperatures, to eliminate the need for cooling water.
  • Magnetic bearing housing isolators.
  • All bearing combination arrangements are available where suitable: Ball/Ball, Sleeve/Ball, Tilt Pad/Sleeve.

H2R-BB2

 

Typical Application:
Two stage, center-line mounted pumps designed for high temperature services requiring differential head beyond the capabilities of single stage pumps.

 

Two Stage Single or Double Suction First Stage
Pumps Fully compliant with API 610 requirements

Operating Parameters:

  • Flow rate in excess of 6,200 USGPM (1,400 m3/h).
  • Differential heads up to 2,800 FT (850 m).
  • Temperatures up to 800 Deg. F (425 Deg. C).
  • Standard Design Working Pressure of 725 PSIG (5,000 kpag).
  • Higher pressure designs available.

               
Standard Features:

  • Widest hydraulic coverage in the industry.
  • Application tailored hydraulic selections.
  • 600/900/1500# flange ratings.
  • Controlled compression fully confined gasket fit, case to cover.
  • Available in all API 610 Table H-1 materials.
  • Close clearance metalized carbon throat bushing for optimal control of stuffing box environment.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements
  • Inpro/Seal bearing housing closures.
  • Rigid cast Carbon steel bearing housings, with fins for improved heat dissipation.
  • Heavy duty baseplate, drip rim or drip pan designs.

 

Optional Features:

  • High pressure special casing designs.
  • Fan/Heat-sink bearing housing cooling arrangement for operation at elevated temperatures, to eliminate the need for cooling water
  • Magnetic bearing housing isolators.
  • All bearing combination arrangements are available where suitable: Ball/Ball, Sleeve/Ball, Tilt Pad/Sleeve.

HM-BB3

 

Typical Application:
Used for Boiler Feedwater, water injection, Amine, and many other applications in the Oil and Gas production and processing industry

 

Multistage Single or Double Suction First Stage
Pumps Fully compliant with API 610 requirements

Operating Parameters:

  • Flow rate in excess of 4,400 USGPM (1,000 m3/h).
  • Differential heads up to 5,600 FT (1,700 m).
  • Temperatures up to 400 Deg. F (200 Deg. C).
  • Standard Design Working Pressure of 2,250 PSIG (15,000 kpag).

               
Standard Features:

  • Wide hydraulic coverage.
  • Application tailored hydraulic selections.
  • 600/900/1500# flange ratings.
  • Available in all API 610 Table H-1 materials.
  • Hydraulically opposed impeller arrangement for thrust balancing.
  • Axially split, precision milled parting flanges.
  • Split case wear rings and center bushings for ease of maintenance.
  • Integral balance line.
  • Rigid design shaft for minimal deflection to meet and exceed API 610 requirements.
  • Inpro/Seal bearing housing closures.
  • Heavy Duty baseplate, drip rim or drip pan designs.

               
Optional Features:

  • High pressure special casing design.
  • Positive retention of impellers in both directions.
  • Fan/Heat-sink bearing housing cooling arrangement for operation at elevated temperatures, to eliminate the need for cooling water.
  • Magnetic bearing housing isolators.
  • All bearing combination arrangements are available where suitable: Ball/Ball, Sleeve/Ball, Tilt Pad/Sleeve.